Helmets

JSP EVO® VISTAshield® safety helmet with an integrated optical class 1 face shield that retracts fully inside the helmet. Impact class A. Suitable for wearing with prescription glasses. The lightweight ABS shell is impact-resistant.
The Revolution® Flex headband with a 3D profile and extended rear section reduces pressure points and adapts to the head. Revolution® Wheel Ratchet adjustment wheel. Dermatologically tested Chamlon™ Egyptian-cotton sweatband.
Accessory attachment points accommodate lights, safety glasses and ID-card holders. Dual ventilation improves airflow and reduces the temperature inside the helmet by an average of 2-3 degrees. Compatible with other protective equipment, including ear defenders and face shields.
Temperature range: -40 °C to +50 °C. The supplier states use around equipment with voltages up to 1000 V AC or 1500 V DC; electrical suitability of this specific ventilated model must be clarified before use.
Shield properties: optical class 1 for continuous use without image distortion; K — resistance to scratches from fine particles; N — anti-fog protection; 2C-1.2 UV filter to EN170.
Can be equipped with a JSP Baseworker™ four-point chin strap. Material: ABS. Sweatband: Egyptian cotton. Suspension: polyester textile. Accessory slot: 30 mm.
Colours: blue, white. Size: 53-64 cm, wheel-adjustable. Weight: 515 g.
Standards stated by the supplier: EN 397, EN 166 1AT KN, EN170 2C-1.2, EN 50365; CE marking.

JSP EVO3 Comfort Plus lightweight, comfortable, impact-resistant HDPE safety helmet without ventilation holes. The six-point suspension improves stability and comfort. The Chamlon™ Egyptian-cotton sweatband is dermatologically tested and non-allergenic.
The 3D headband system provides 1-2-3-point depth adjustment for a precise fit. Revolution® Wheel Ratchet adjustment wheel. The supplier states use around equipment with voltages up to 1000 V AC or 1500 V DC. Temperature range: -40 °C to +50 °C.
Compatible with other PPE, including ear defenders and face shields. Can be equipped with a JSP Baseworker™ four-point or JSP EVO3 two-point chin strap.
Material: HDPE. Sweatband: Egyptian cotton. Suspension: polyester textile. Accessory slot: 30 mm.
Colours: white, blue, yellow, orange, green, red. Size: 53-64 cm, wheel-adjustable. Weight: 372 g.
Standards: EN 397, EN 50365; CE marking.

Light and comfortable, impact-resistant, protective helmet JSP EVO3 Comfort Plus, made of HDPE material. Provides excellent protection in a wide range of working conditions. With ventilation holes. The six-point inner liner provides comfort and stability to the helmet. Chamlon™ sweat absorbent tape is made of Egyptian cotton, dermatologically approved, hypoallergenic. The 3D head strap system is designed to precisely fit the helmet to the head using the unique 1-2-3 point depth adjustment system. The helmet is adjustable with the Revolution® Wheel Ratchet. The helmet can be used together with other PPE: headphones, visors, etc. Resistant to temperatures from -40 °C to +50 °C.
Can be equipped with:
Helmet strap JSP Baseworker™, 4 points,
Belt JSP EVO3 for two-point helmet
Material: HDPE
Sweat absorbent tape: Egyptian cotton
Lining: textile (polyester)
Connection with other PPE: slot (30 mm)
Color: gray
Size: 53-64 cm, adjustable with wheel
Weight: 372 g
Standard: EN 397, CE mark

The 3M GH4 textile chin strap has three attachment points and an adjustable length. Designed for 3M G3000 helmets to improve stability and retention.

The JSP Baseworker™ chin strap with 4 attachment points is compatible with JSP® EVO® helmets. It helps retain the helmet securely during vigorous movement.
The strap can be adjusted while the helmet is being worn. Size and attachment-position adjustment accommodate different head sizes. An ergonomic quick-release buckle makes the helmet easy to remove.
Easy installation: attach the strap to the helmet shell, put on the helmet and adjust for a secure, comfortable fit.
Standards: EN 397:2012 and EN 397:2025 Type 1; CE marking.

Protective helmet AEVO® VISTAshield® Dualswitch™ with Silver CR2 reflective strip and retractable face shield. This helmet is fully certified to both EN 397 and EN 12492 standards and allows you to easily switch between the settings of these two standards with just one click of the switch on the chinstrap. The VISTAshield® face shield has Class A impact resistance, tested against a 6 mm steel ball traveling at speeds of up to 685 km/h (425 mph). Eye protection is replaceable. The helmet is fully compatible with prescription glasses: the EVO® VISTAshield® allows the user to comfortably wear prescription glasses under the integrated face shield
Features and benefits
Optical class 1 - high optical quality without image distortion.
A - impact resistance class - high energy impact; A 6 mm, 0.86 g steel ball traveling at 684 km/h (425 mph).
T - shock resistance at extreme temperatures (tested at -5 °C and +55 °C).
Class K - resistance to scratches (surface damage from small particles).
Class N - resistance to fogging.
Protection against UV rays - 2: UV filter (EN 170) ensures protection against harmful UV rays, undistorted color vision, high light transmission.
Tested with molten metal - no penetration through helmet shell. Body deformation must remain < 10 mm.
Tested for resistance to lateral deformation - additional test to EN 397.
Tested at -40°C - The helmet is kept in a freezer at -40°C for up to 24 hours before testing.
4-point harness. The 4-point chin strap is easy to adjust on the head. The adjustment of the size and attachment points allows the helmet to be adapted to individual needs for different head sizes, ensuring stability and greater comfort.
Switch position down (SWITCH DOWN). The unfastening force of the chin strap according to the EN 12492 standard is greater than 500 newtons. This reduces the risk of losing the helmet during a fall.
Switch position up (SWITCH UP). The release force of the chin strap according to the EN 397 standard is between 150 and 250 newtons. This reduces the risk of strangulation - the chinstrap is designed to release (unwind) if it gets caught on something.
Maximum Comfort: The Revolution® Flex inner helmet liner is adjustable with a dial to eliminate pressure points and ensure maximum comfort.The helmet comes complete with a replaceable Chamlon™ cotton sweat wicking band, which is dermatologically approved and hypoallergenic.
Reliable fit. The 3D depth adjustment system allows you to achieve the most accurate possible fit of the safety helmet.
Modern accessories. Specially designed mounting points on the helmet shell allow for the installation of a wide range of modern accessories, including headlamps, goggles and ID card holders.
Ventilation. The double vented shell increases comfort and promotes cooling airflow, reducing the temperature inside the helmet by an average of 2-3 degrees.
Material: ABS
Sweat absorbent tape: Egyptian cotton
Lining: textile (polyester)
Connection with other PPE: slot (30 mm)
Color: Hi Viz yellow, white, red
Size: 53-64 cm, adjustable with a wheel
Operating temperature: -40°C to +50°C
Weight: 609.7 g
Standard: EN397, EN12492, EN50365, EN166, EN170, CE mark