Coated gloves

Description
Knitted work gloves covered with polyurethane Pesso PU-EKO | PUEKOP Polyurethane coated nylon work gloves PU-EKO GRAY. The gloves fit the hand well, making it comfortable to hold even very small objects. Polyurethane evaporates moisture, so hands sweat less. Material: slub knit nylon. Top: covered with polyurethane PU. Palm: covered with polyurethane PU. Cuff: Knitted elastic cuff. Size: 7-11 Package: 12 pairs; box 240 pairs Suitable for use: for construction work and tasks with various tools, in construction, crafts. Standard: EN388 (4131), CE marking. The level of protection is only valid for the coated area of the gloves. Gloves resistance: Abrasion resistance level 4 Cut resistance level 1 Tear resistance level 3 Puncture resistance level 1 Pesso workwear, boots and PPE Catalog: pessosafety.eu Size 7, 8, 9, 10, 11
Standards and certificates
EN388

Description Nylon assembly work gloves covered with PU Guide 520 Features: Seamless knitting with particularly sensitive fingertips. Upper: Fingers and palm covered with PU, which ensures good grip and protection against mechanical damage. Other: The gloves are well ventilated and comfortable to wear. Without silicone. Suitable for: assembly work and work requiring precision and sensitivity. Complies with CE category 2, according to EN 388 - 4131 Sizes: 6-11 Size 6, 7, 8, 9, 10, 11 Standards and certificates EN 388

Description Knitted nylon work gloves coated with PU | Guide 650 Ultra thin seamless knit nylon gloves with PU coating. Features: Elastic and comfortable gloves resistant to abrasion. Knitting: One-piece nylon knitting. Palm: The palm and fingertips are covered with microporous PU that allows the hand to breathe. The PU coated part is resistant to moisture and oils. Cuff: Fits well and wraps around the wrist. Suitable for use: assembly, installation work requiring extreme precision and extreme finger sensitivity, as well as flexibility. It is used in areas where the probability of mechanical injuries is small: packaging, assembly, installation work. Composition: nylon, PU. Conforms to EN 3120 EN 388 Sizes: 6-11 Size 6, 7, 8, 9, 10, 11 Standards and certificates EN 3120 EN

Work gloves STEPO SANDY with sandy nitrile coating. It is a rough, sand-textured layer that improves grip on oily, wet surfaces, with slippery parts. The lining of the gloves is made of polyester (knit density - 13G), thin, fits the hand well. The elastic cuff provides a snug fit.
Material: Polyester with sandy nitrile coating
Cuff: knitted
Size: 7, 8, 9, 10, 11
Standard: EN21420:2020, EN388:2016 (4121X), CE mark
Package: 120/12 pairs (each pair connected)

Work Gloves MaxiFlex® ENDURANCE are quality work gloves with nitrile coating, for precision tasks.
Sizes: 9-12
Standard: EN21420:2020, EN388:2016 (4131A), CE marking
Pack: 120/12 pairs

Work gloves STEPO STARLIGHT are made of nylon (knitting density – 15G), the palm is covered with soft nitrile foam. These properties ensure special flexibility, lightness and adaptability of the gloves to the hand. The elastic cuff fits well on the wrist. Nitrile foam coating with additional nitrile dots on the palm provides excellent grip on dry, wet and oily surfaces. Has the highest resistance to the effects of friction and tearing. The gloves also feature excellent breathability and tactile sensitivity, making them ideal for work that requires care and precision.
Material: nylon/elastane coated with nitrile foam
Cuff: elastic
Size: 8, 9, 10, 11
Standard: EN 21420:2020, EN 388:2016 (4131X), CE mark
Package: 120/12 (Each pair connected by a hook)

Work gloves SKYTEC EMG725 coated with polyurethane, protect against cuts (level B). The thumb area is additionally reinforced. The gloves fit the hand perfectly. Polyurethane coating on the palm area is light, flexible and durable with high abrasion resistance. The gloves are perfect for working with wet or oily surfaces and also ensure safety when working with sharp edges. The cuff securely adapts to the wrist for added protection and comfort.
Material: high density polyethylene HPPE/ fiberglass covered with polyurethane
Cuff: elastic
Size: 8, 9, 10, 11
Standard: EN 21420:2020, EN 388:2016 (4X43B), CE mark
Package: 120/10

Work gloves STEPO KATANA coated with polyurethane, protect against cuts (level D). The thumb area is additionally reinforced. The gloves fit the hand perfectly. Polyurethane coating on the palm area is light, flexible and durable with high abrasion resistance. The gloves are perfect for working with wet or oily surfaces and also ensure safety when working with sharp edges. The cuff securely adapts to the wrist for added protection and comfort.
Outstanding features:
Touch screen function: the gloves are compatible with touch screens, allowing you to use devices comfortably without removing your gloves.
Heat Contact Resistance: Resistant to contact heat up to 100°C 15 seconds, providing protection in hot work environments.
Material: high density polyethylene HPPE/ fiberglass covered with polyurethane
Cuff: elastic
Size: 8, 9, 10, 11
Standard: EN 21420:2020, EN 388:2016 (4X43D), EN407:2020 (X1XXXX), CE mark
Package: 120/12 (each pair connected with a hook)

Work gloves STEPO SANADA coated with polyurethane, protect against cuts (level B). The gloves fit the hand perfectly. Polyurethane coating on the palm area is light, flexible and durable with high abrasion resistance. The gloves are perfect for working with wet or oily surfaces and also ensure safety when working with sharp edges. The extended cuff fits snugly around the wrist for added protection and comfort.
Material: high density polyethylene HPPE/ fiberglass covered with polyurethane
Cuff: elastic
Size: 8, 9, 10, 11
Standard: EN 21420:2020, EN 388:2016 (4X43B), CE mark
Package: 120/12 (each pair connected with a hook)

Work gloves STEPO TAKEDA coated with nitrile protect against cuts (level C). Extremely strong mechanically, resistant to friction and tearing. Thanks to the special composition, the gloves have extremely good mechanical resistance properties, so they last significantly longer than ordinary gloves coated with polyurethane or nitrile.
Material: nitrile covered fiber of various fabrics
Cuff: knitted
Size: 9, 10, 11
Standard: EN388 (4X43C), CE mark
Package: 120/12

Gloves STEPO KANEKO cut protection gloves (level B) made using advanced POK® yarn knitting technology. This technology ensures ultra-thin 18G density textile knitting. The palm of the gloves is covered with an extremely soft MATTEMORE® NBR nitrile foam coating, which guarantees the highest performance, comfort and precision during work that requires high sensitivity of the fingers. The advantage of MATTEMORE® NBR coating is extremely high resistance to abrasion and mechanical wear, and the denser layer effectively prevents moisture and liquids from being absorbed into the base of the glove. The elastic cuff adapts perfectly to the wrist, ensuring a comfortable wear.
Main features:
Improved fit: Thinner coating and ergonomic design provide a tight, wrap-around fit, reduce hand fatigue and improve touch sensitivity, allowing you to work comfortably for long periods of time.
Comfort with cut protection: POK® technology not only provides a soft feel, but also protection against minor cuts when working in cut-risk environments
Air permeability: Designed to ensure optimal air flow, hands remain cool and dry even when the gloves are worn for long periods of time.
Adhesion Control: Provides excellent grip on both dry and wet surfaces, increasing work safety and precision.
Touchscreen function: Allows convenient control of devices without removing gloves, ensuring productivity and comfort.
These gloves are an ideal choice for industries where a combination of comfort and cut protection is required, such as automotive, metalworking, logistics, construction, plastic handling, glass work.
Top: POK® yarn knitting lining to OEKO-TEX material standard
Palm: coated with soft MATTEMORE® NBR nitrile foam
Size: 8, 9, 10, 11
Standard: EN21420:2020, EN388:2016 (4X42B), CE mark
Package: 120/12 (Each pair connected by a hook)

Gloves STEPO DORADO are made of thin nylon and elastane lining, using 15G dense textile knitting. The palm of the gloves is covered with an extremely soft MATTEMORE® NBR nitrile foam coating, which ensures the highest performance, comfort and precision when performing tasks that require high sensitivity of the fingers. The thumb area is additionally reinforced for added durability. The advantage of the MATTEMORE® NBR coating is that the coating is extremely resistant to abrasion and mechanical wear, and the denser coating layer effectively prevents moisture or liquids from being absorbed into the base of the glove.
Main features:
Durability: The gloves have extremely high wear resistance, exceeding the standard 4 level resistance by about 3 times, sustaining more than 8000 cycles of friction.
Air permeability: Designed to ensure good air circulation, keeping hands cool and dry, which is especially important during long periods of wear.
Excellent elasticity: The gloves offer flexibility, freedom of movement and wearing comfort, making them ideal for precision work.
Adhesion Control: Ensures good grip on both dry and wet surfaces, increasing work safety and precision.
Touch screen function: Compatible with touch screens, allowing convenient use of devices without removing gloves.
Heat Contact Resistance: Withstands heat for up to 100°C at least 15 seconds, providing protection in hot work environments.
These gloves are perfect for use in automotive, manufacturing, construction, agriculture, warehousing and other applications where durability and flexibility are required.
Upper: Nylon/Elastane
Palm: coated with soft MATTEMORE® NBR nitrile foam
Size: 8, 9, 10, 11
Standard: EN21420:2020, EN388:2016 (4131X), EN407:2020 (X1XXXX), CE mark
Package: 120/12 (Each pair connected by a hook)

Work gloves STEPO MIRA are made using a special POK® yarn knitting technology, which ensures extremely thin 18G dense textile knitting. The palm of the gloves is covered with an extremely soft MATTEMORE® NBR nitrile foam coating, guaranteeing the highest performance, comfort and precision when performing tasks that require high sensitivity of the fingers. The advantage of the MATTEMORE® NBR coating is that the coating is extremely resistant to abrasion and mechanical wear, and the denser coating layer effectively prevents moisture or liquids from being absorbed into the base of the glove. The cuff is elastic and adapts well to the wrist.
Main features:
Improved fit: Thinner coating and ergonomic design provide a tight, hand-hugging fit, reducing hand fatigue and improving touch sensitivity.
Comfort: POK® technology provides a soft feel and ensures comfort even when wearing the gloves for a long time.
Air permeability: The gloves are designed to provide excellent air circulation, keeping your hands cool and dry, even during intense work.
Excellent adhesion: Ensures reliable adhesion to dry surfaces, increasing work safety and precision.
Touchscreen function: Allows convenient control of devices without removing gloves, thus increasing productivity and comfort.
These gloves with POK® and MATTEMORE® technology are an excellent choice for tasks where both protection and comfort are required, such as in the automotive industry, warehousing, packaging, gardening, manufacturing and various precision jobs.
Top: POK® yarn knitting lining to OEKO-TEX material standard
Palm: coated with soft MATTEMORE® NBR nitrile foam
Size: 8, 9, 10, 11
Standard: EN21420:2020, EN388:2016 (4121X), CE mark
Package: 120/12 (Each pair connected by a hook)

Work gloves STEPO DRAKO are made of nylon (knitting density – 15G), the palm is covered with soft nitrile foam. These properties ensure special flexibility, lightness and adaptability of the gloves to the hand. The elastic cuff fits well on the wrist. The nitrile foam coating on the palm provides excellent grip on dry, wet and greasy surfaces. Has the highest resistance to the effects of friction and tearing. The gloves also feature excellent breathability and tactile sensitivity, making them ideal for work that requires care and precision.
Material: nylon/elastane coated with nitrile foam
Cuff: elastic
Size: 8, 9, 10, 11
Standard: EN 21420:2020, EN 388:2016 (4131X), CE mark
Package: 120/12 (Each pair connected by a hook)

Work gloves STEPO GEMINI are made of ultra-thin nylon (knitting density – 18G), the palm is covered with soft nitrile foam. These properties ensure the special flexibility, lightness and adaptability of the gloves to the hand - like a second skin. The elastic cuff fits well on the wrist. The nitrile foam coating on the palm ensures excellent grip on dry surfaces and the highest resistance to the effects of friction. The gloves also feature excellent breathability and tactile sensitivity, making them ideal for work that requires care and precision.
Material: nylon/elastane coated with nitrile foam
Cuff: elastic
Size: 8, 9, 10, 11
Standard: EN 21420:2020, EN 388:2016 (4121X), CE mark
Package: 120/12 (Each pair connected by a hook)

Nylon gloves covered with a soft layer of porous latex STEPO TRITON. Fit well to the hand, excellent grip on both dry and wet surfaces. Long-lasting, flexible and comfortable. It has extremely good mechanical resistance properties.
Material: nylon coated with soft latex
Cuff: knitted
Size: 8, 9, 10, 11
Standard: EN21420:2020, EN388:2016 (2131x), CE mark
Package: 120/12 (Each pair connected by a hook)

Latex coated nylon work gloves STEPO REDSTAR. Flexible, fits well to the hand, excellent grip on slippery surfaces. It is convenient to hold even very small objects.
Material: nylon coated with soft latex
Cuff: knitted
Size: 8, 9, 10, 11
Standard: EN2140, EN388:2016 (2131X), EN407 (X1XXXX), CE mark
Package: 120/12 (Each Pair Connected)

Work gloves STEPO GRIP covered with thick wavy nitrile. Adheres well to various surfaces, fits perfectly in the hand.
Material: Ripple knit nylon coated with wavy nitrile
Cuff: knitted
Size: 8, 9, 10, 11
Standard: EN21420:2020, EN388:2016 (4121X), CE mark
Package: 120/12 pairs (each pair connected)

Ultra-thin and elastic nylon work gloves coated with polyurethane CXS TURI. Fit perfectly to the hand, it is comfortable to grip even very small objects. Polyurethane evaporates moisture, so hands sweat less.
Material: thin 18G nylon coated with polyurethane
Color: blue
Sizes: 6, 7, 8, 9, 10, 11
Standard: EN388 (3121X), CE mark
Package: 240/12/1 pairs (each pair in a separate bag)

Work gloves made of polyester STEPO PU-EKO GREY coated with polyurethane. It fits perfectly in the hand, it is comfortable to hold even very small objects. Polyurethane evaporates moisture, so hands sweat less.
Material: polyester coated with polyurethane
Color: gray
Sizes: 7, 8, 9, 10, 11
Standard: EN21420:2020, EN388:2016 (4131X), CE mark
Package: 240/12 pairs (each pair connected)

Work gloves made of polyester STEPO PU-EKO BLACK coated with polyurethane. It fits perfectly in the hand, it is comfortable to hold even very small objects. Polyurethane evaporates moisture, so hands sweat less.
Material: polyester coated with polyurethane
Color: black
Sizes: 8, 9, 10, 11
Standard: EN21420:2020, EN388:2016 (4131X), CE mark
Package: 240/12 pairs (each pair connected)